House longhorn beetle in roof beams: inspection and repair
Woodworm in a roof is dangerous because it stays unnoticed for years. Here is how to inspect the beams, what an attack means for load-bearing capacity and how repair works.
Why roofs are affected
Roof structures are often made of dry softwood, which is food for the house longhorn beetle. The attic heats up in summer and is rarely checked, so an attack can go unnoticed for a long time.
How to inspect the roof
- Use a strong torch on every surface, especially joints and where beams rest in the wall.
- Look for exit holes and piles of frass on the attic floor.
- Press lightly with a sharp screwdriver in several places. Wood that crumbles is damaged.
- Check for signs of damp, for example under broken roof tiles.
Do not step on or load weakened parts.
What it means for load-bearing capacity
Larvae feed mainly on sapwood, so one part of a beam can be badly damaged while the next is almost untouched. The surface may look sound while the inside is hollow. A structural engineer should judge the load-bearing capacity.
Repair steps
- Assess the extent: photograph and mark the affected areas.
- Decide: treat, reinforce or replace the timber.
- Kill the larvae: choose a method that reaches the inside of the wood, see How to get rid of woodworm.
- Prevent: fix leaks and keep the space ventilated and the wood dry.
- Monitor: check holes and dust for a season or two.
Microwaves in the roof
The microwave device reaches up to 25 cm deep and can treat timber hidden under cladding. We treat the wood section by section, thicker beams from several sides. Work above about 2.5 m or under a sloped roof takes longer, so the price is agreed individually. See prices.
Suspect woodworm in your roof?
Send photos of the beams and holes and we will reply as soon as possible.